Different Floor Sanding Tips

Floor sanding is an expensive procedure that takes away only the topmost layer of vinyl on hardwood floors but does not remove any natural wood. This relatively cheap method also saves you from the messy clean-up and possible hazards involved in floor sanding yourself. Here are some floor sanding tips that can help you achieve that look of sophistication and quality on your floor and save you money at the same time.

When you need to floor sand your floors, you have many options. You can use professional hardwood floor sanders that are made for this purpose. These machines are not for everyone. They require experience, skill and knowledge of how to operate them correctly. If you are a handyman, you can use these machines, but they can take hours of effort and sanding before seeing the results. If you are not one of those people, there are portable or do-it-yourself floor sanders that you can use.

Tip One: Do Some Homework

Find out the different kinds of tools that you may need for your project. You may need to rent a sander and a nail gun if it is not on the list. These two tools are necessary to complete the job successfully. Use the following tips to choose the right one.

Tip Two: Nail Plans

Browse through some floor sanding Adelaide plans to find the ones that focus on the specific details and types of surfaces you plan to sand. Nails and the edges of wooden floors are often similar. Nail designs will include profiles, drills, cuts and angles.

Tip Three: Polyurethane Floor Screens Provides Polyurethane Protection

As with any other type of floor covering, there are certain materials and techniques for floor sanding that you should avoid to keep your polyurethane from wearing away. Spills and stains should be removed promptly, and any excess polyurethane should be wiped up immediately. Simple polyurethane screening hardwood floors can provide the protection you need.

Tip Four: Clean Off the Floorboards

Gently using a floor sanding Adelaide machine is the simplest way to clean off the surface of floorboards. A damp mop is often more effective than a wet cloth when keeping sanding surfaces clean. When removing any stains, especially stubborn ones, make sure you do not use water, as this will only cause a stain to soak further into the material. For stubborn dirt and stains, you may want to let the floorboards dry overnight before vacuuming them.

Tip Five: Polivac Rubber and Roll-Offs

As with any other type of floor sanding project, you should always use the proper equipment. For wooden floors, an all-purpose polishing compound is most effective. Also, do not use a floor sanding machine on a polished hardwood floor as the suction may damage the flooring. Instead, use a belt sander on a regular sanding machine to give a nice smooth finish.

Tip Six: Edge Sander and Wheeled Sanders

The first step in any sanding procedure is to begin at the edges. This makes it much easier to get into tight places that you otherwise might not be able to reach with regular sandpaper. You can also use a wheeled sander or a politic rubber edge sander to remove those pesky cobwebs and lint from corners. If you have a corner where your child has dragged their pencil across the floor, you can use a wheeled sanding machine to pick up the pieces of chalk. Then, use your politic or belt sander to smooth out the rest of the area.